C-COM Satellite iNetVu 7710 - Maintenance Test (Demo Window)

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
84
8.2.3. Maintenance Test (Demo Window)
Used for system tests, trouble-shooting, and for demonstrating the iNetVu
®
Mobile System. This
feature is accessible from the Maintenance Window Test button.
Start Angles
Initial values for the test/demo sequence.
End Angles
End values for the test/demo sequence.
Speed
Speed of the motor during the test/demo sequence (1 – lowest, 9 – highest).
Loop Interval
Enables an infinite loop of the test/demo sequence with time between test/demo sequences.