C-COM Satellite iNetVu 7710 - Page 68

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
68
Enable/Disable Transmitter
Automatically Enables or Disables the Transmission process. Background will turn grey
when transmitter is disabled and green when the transmitter is enabled.
Enable/Disable ACP
Enables or Disables the ACP (Automatic Cross-Pol Testing), and Manual Cross-Pol
Testing. Drop down will only be accessible with Hughes Ku service.
Fig. 62: ACP Option Selection
To Enable ACP, select “AUTO” or “MANUAL” from the ACP drop down list and click on
the ‘Enable/Disable ACP’ Button to initiate.
To Stop ACP testing, select “STOP” from the ACP drop down list, and click on the
Enable/Disable ACP Button to initiate.
Deploy Antenna
Automatically moves antenna to the manually entered Elevation, Azimuth and
Polarization angles.
Fig. 63: Deploy Antenna Input Values
Quick Deploy
Automatically moves antenna to the manually entered Elevation, Azimuth
and Polarization angles without first moving to 30˚ on Elevation. This process moves
to the set angles without the extra angle tuning that occurs with the Deploy Antenna
button.
Range
-90 to +90
-180 to +180
-90 to +90