Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
3
2 Introduce
ZTE EPON SFU series of terminal equipment is based on EPON technology based on
the broadband access market, to meet the broadcaster operators broadband access and
FTTH, and design passive optical network terminal products that integrate CATV optical
receiver and achieve broadband, CATV dual network integration. It is based on mature
and stable, cost-effective Gigabit EPON technology and integrate Gigabit Ethernet
switching technology, WDM technology and HFC light reception technology, with high
reliability, easy management and good quality of service (QoS) and so on. Technical
performance of equipment meet the IEEE802.3ah, China Telecom EPON equipment
technical requirements (V2.1 / V3.0) and other requirements.
EPON technology is a combination of PON technology and Ethernet technology
advantages of emerging technologies, is a point to multi-point networking technology，with
high bandwidth, high efficiency, large coverage, rich user interface and many other
advantages, is the operator to achieve access network business broadband, integrated
transformation of the ideal technology.
ZTE chipset EPON SFU series also integrates powerful routing and forwarding
functions by default in the case of SFU (pure data). It is easy to manage and can be flexibly
upgraded, expanded, and networked. The equipment has been implemented with EPON
central office equipment (Huawei / ZTE / FiberHome / Alcatel-Lucent) OLT)
interoperability, composed of Gigabit systems, to meet access needs of the two-in-one
video, data services, FTTH / FTTO.
2.1 Product Feature
Internet, CATV, IPTV service access
Equipment technical performance meets IEEE802.3ah, China Telecom CTC 2.1
& CTC3.0 standard
Support bidirectional FEC, supports the RS (255, 239) FEC decoding
Supports default SFU (pure bridged data) access
To Next Page
Loading...
