CAB A4 User Manual

103cab Produkttechnik GmbH & Co KG
ZZ Z1 Z2 ZZ Z1 Z2 ZZ Z1 Z2 ZZ Z1 Z2
To create the character ZZ: Type the first character [Z1], then type the second
character [ALT-Z2]
For example : For the letter "ñ", type the first character [~], then type the
second character [ALT-n]
NOTICE !
Use the data in table 11a to enter the Z1 character if it is not available on
your keyboard.
Table 11b Special characters available by entering two
characters one after another using the external
keyboard.
11. External Keyboard

CAB A4 Specifications

General

Printer Type	Thermal transfer / direct thermal
Interfaces	USB, Ethernet, RS232
Label Thickness Range	0.05 mm - 0.25 mm
Memory	8 MB Flash
Power Supply	100-240 VAC, 50/60 Hz
Operating Temperature	+5°C to +40°C
Print Resolution	203 dpi
Humidity Range	10-85% non-condensing