7cab Produkttechnik GmbH & Co KG
A General Guide to the Documentation
This manual contains the description and usage instructions for the A3, A4 and
A6 printers.
For detailed technical information on programming of the A3, A4 and A6, a
separate Programming Guide is available on request. For specific information
on maintenance and repair of the printers, separate Service/Maintenance
Manuals are available.
The first few chapters cover general information which is necessary for
unpacking and setup of the printer, including ribbon and media loading.
Chapter 5 covers the connection and usage of optional equipment that may be
attached to the printer.
In the appendices, additional information such as cabling specifications, error
messages and problem resolution, and maintenance/cleaning instructions are
included.
Please take special note of the specifications for suggested print media and
the references to cleaning the printer, to prevent damage, poor quality printing
and avoidable failures of your printer.
Every effort has been made in the creation of this manual to provide as much
information as possible in a form that is both understandable and useful.
We welcome your comments and suggestions regarding additions or
corrections to improve future editions of this manual.
NOTICE !
The figures in this manual normally show the Transfer Printer A4 !
If there are important differences between the printer types you will find a
notice !
A General Guide to the Documentation
To Next Page
Loading...
Need help?
General
