C-1cab Produkttechnik GmbH & Co KG
Appendix C - Error Messages / Problem Solution
Error Messages
The printer is equipped with a self diagnostic system that will indicate errors on
the printer's LCD. The operator will be informed by the printer LEDs whether
there are recoverable errors allowing continuation of the print job (ie. "Out of
paper"), or an error which requires discontinuation of the print job.
Recoverable Errors
While processing a print job, errors can occur that can be 'recovered' by the
operator, allowing the print job to continue from the point at which it was
stopped.
Display
The symbol appears in the display.
The display shows the type of error and the total amount of labels remaining for
the current print job.
Function Keys
Key Description Function
flashing Continues the current print job after the error has
been corrected.
on Short press - Cancels the current print job
Long press - Cancels the current print job
and deletes all jobs from the
internal memory
Table C-1 Function of Keys in the Recoverable Error Mode
Appendix C - Error Messages / Problem Solution
To Next Page
Loading...
Need help?
General
