CAB A4 User Manual

81cab Produkttechnik GmbH & Co KG
9. Test Options
The meaning of the details printed on the device list are as follows:
CPU : Type and serial number of the CPU
Revision number of the CPU and FPGA
TPH : Resolution and number of dots
of the printhead installed
CARD* : Capacity, manufacturer, serial number and
version number of the FlashCard installed
SLOT* : Type, serial number and revision number of the
interface expansion card installed.
USB [a]* : Type and revision number of the USB devices installed
[b/c]Speed a : identifying number of the USB device
b : identifying number of the USB device, which is
connected to device a
c : identifying number of the device b port, which is
connected to device a
Speed : Low- or High-Speed-USB-device
* Will only be printed if the respective devices are installed.

CAB A4 Specifications

General

Printer Type	Thermal transfer / direct thermal
Interfaces	USB, Ethernet, RS232
Label Thickness Range	0.05 mm - 0.25 mm
Memory	8 MB Flash
Power Supply	100-240 VAC, 50/60 Hz
Operating Temperature	+5°C to +40°C
Print Resolution	203 dpi
Humidity Range	10-85% non-condensing