7955 DC Master fader 8-13
Revision J2005-2 J-Type
computer. It will still drive the DC busses and affect the channels assigned to it.
All faders can be put in isolate mode by pressing the ALL FADER ISOLATE “SET”
SWITCH on the master fader control panel below the CCM module. Similarly, all fad-
ers can be taken out of isolate mode by pressing the ALL FADER ISOLATE “CLEAR”
switch on the same panel.
;1817 )DGHU
A standard 100 mm fader controlling all channel VCA faders selected to it.
;1818 )DGHU#2SHQ
This LED illuminates as soon as the fader moves away from infinity, unless its MUTE
is set ‘on’.
To Next Page
Loading...