7865 Stereo Input Channel 3-9
Revision J2005-2 J-Type
previously recorded switch data will be ignored by the module, leaving the switches
at their new setting until you cancel the function.
614175 0DLQ#3)/
Press this button to ‘listen’ to the channel signals pre-fader.
614176 &KDQQHO#0XWH
Press this button to mute the channel manually.
The MUTE switch has a secondary function when used in conjunction with the
CHECK switch, (located on the OSC Module). If a channel is muted (MUTE switch
‘On’) and the CHECK switch is pressed, the muted channel is unmuted, but all other
channels are forced into MUTE. This allows the originally muted channel(s) to have a
‘SOLO’ function.
To Next Page
Loading...