3-12 7496 Dual Input Channel
J-Type Revision J2005-2
61514 ,23#4#*DLQ
Gain control for input 1, giving continuously variable gain from the minimum of 10 dB
to 60 dB. The position of the gain potentiometer is recorded during a SAVE com-
mand.
61515 ,23#4#1XOO#/('
The Null LED will be illuminated if the position of the I/P 1 gain pot is different from
the programmed position. To recall the programmed position, rotate the potentiome-
ter until the LED goes ‘out’.
:7<9#'XDO#,QSXW#&KDQQHO
3.2.1 I/P Gain
3.2.2 I/P 1 Null LED
3.3.3 I/P 1 PFL
3.2.4 I/P 1 -20dB Pad
3.2.5 I/P 1 Phantom Power
3.2.6 I/P 1 Phase Change
3.2.7 I/P 1 On/Off
3.2.15 Oscillator Bus Select
3.2.17 Direct O/P “Pre” EQ
3.2.8 I/P 2 Gain
3.2.9 I/P 2 Null LED
3.2.10 I/P 2 PFL
3.2.11 I/P 2 -20dB Pad
3.2.12 I/P Phantom Power
3.2.13 I/P Phase Change
3.2.14 I/P 2 On/Off
3.2.16 Input Amplifier isolate
3.2.18 Direct O/P “Post” Channel fader
3.2.19 Subs and Matrix Routing switches
3.2.20 Subs and Matrix Routing LEDs
3.2.21 Matrix A select
3.3.23 Pan Pot Insert
3.2.22 Matrix B select
3.2.24 Pan Pot Null LED
3.2.25 Pan Pot
To Next Page
Loading...