7925 Programmable Group Module 4-5
Revision J2005-2 J-Type
714153 6XE#WR#0DWUL[#5RXWLQJ
These buttons may be controlled by the Cue Automation.The associated LED indi-
cates On/Off for each Sub to Matrix cross point. They are also used in conjunction
with SELECT, LOCK and RESTORE to select/control audio level at each cross point.
714154 6XE#WR#0DWUL[#'LVSOD\
The display indicates which Sub to Matrix cross point that is being adjusted.
714155 6XE#WR#0DWUL[#/HYHO#&RQWUROOHU
This rotary control is used to adjust the Sub to Matrix Level, indicated by a ring of
4.1.20 Sub to Matrix Routing
4.1.21 Sub to Matrix display
4.1.22 Sub to Matrix Level Controller
4.1.24 Sub to Matrix Select
4.1.26 Sub to Matrix Selection Lock
4.1.23 Sub to Matrix Restore
4.1.25 Sub to Matrix Isolate
:<58#3URJUDPPDEOH#*URXS#0RGXOH
To Next Page
Loading...