Cafe CDD420P2TS1 - User Manual

TM
WARNING
CAUTION
FOR YOUR SAFETY
Read and observe all WARNINGS and CAUTIONS shown throughout these
instructions.
IMPORTANT – Observe all governing codes and ordinances.
ŶNote to Installer – Be sure to leave these instructions for the consumer’s and
local inspector’s use.
ŶNote to Consumer – Keep these instructions with your Owner’s Manual for
future reference.
ŶSkill Level – Installation of this dishwasher requires basic mechanical, electrical
and plumbing skills. Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered under the GE
Appliances Warranty. See Warranty information.
ŶCompletion Time – 1 to 3 Hours. New installations require more time than
replacement installations.
IMPORTANT – The dishwasher MUST be installed to allow for future removal from
the enclosure if service is required.
Care should be exercised when the appliance is installed or removed, to reduce the
likelihood of damage to the power supply cord.
If you received a damaged dishwasher, you should immediately contact your dealer
or builder.
Your dishwasher is a water heating appliance.
BEFORE YOU BEGIN - Read these instructions completely and carefully.
Ŷ
To reduce the risk of electric shock, fire, or injury to persons, the installer must
ensure that the dishwasher is completely enclosed at the time of installation.
Ŷ
FOR PERSONAL SAFETY: Remove house fuse or open circuit breaker before
beginning installation. Do not use an extension cord or adapter plug with this
appliance.
Ŷ
The improper connection of the equipment grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or service representative
if you are in doubt that the appliance is properly grounded.
Ŷ
If house wiring is not 2-wire with ground, a ground must be provided by the installer.
When house wiring is aluminum, be sure to use UL-Listed anti-oxidant
compound and aluminum-to-copper connectors.
Ŷ
To reduce the risk of electric shock, fire, or injury to persons, the installer should
check to ensure that wires are not pinched or damaged, the house wiring is attached
to the dishwasher through a strain relief, and all electrical connections made at
the time of install are contained inside of the terminal block cover.
Ŷ
For models equipped with power cord: Do not modify the plug provided
with the appliance; if it will not fit the outlet, have a proper outlet installed by a
qualified technician.
While performing installations described in this booklet, gloves, safety glasses
or goggles should be worn.
If you have questions, visit our website at: cafeappliances.com
Installation Instructions Dishwasher Drawer
READ CAREFULLY
KEEP THESE INSTRUCTIONS
CAUTION
Opening a drawer will cause the dishwasher to tip forward
when it is not fully installed. When opening a drawer prior to
the dishwasher being fully installed, hold the drawer handle
securely with one hand and the top of the dishwasher with the
other hand. Gloves should be worn.

Summary

Installation Instructions

Before You Begin

General preparation instructions and initial checks before starting the installation process.

Safety Warnings and Precautions

Critical safety advice for installers and users, including warnings about electrical shock and injury.

Installation Preparation Overview

Installation Overview

Provides a summary of the installation process for the dishwasher drawer.

Tools and Parts

Lists the necessary tools and components included in the installation package.

Electrical Wiring Requirements

Electrical Specifications

Details voltage, frequency, amperage, and wire standards for safe operation.

Grounding Procedures

Explains proper grounding methods for electrical safety and preventing shocks.

Optional Hard Wiring Installation

Remove Drawer and Access Power Cord

Steps to remove the lower drawer and access the power cord for hardwiring.

Optional Hard Wiring - Wiring Termination

Terminate House Wiring

Instructions for connecting house wiring to the appliance's terminal block.

Optional Hard Wiring - Refitting

Refit Drawer onto Runners

Steps to re-install the drawer onto the runners after hardwiring.

Product Dimensions

Cabinetry Requirements

Cabinet Dimensions

Specifies the required cabinet space dimensions for installation.

Minimum Clearances

Details the required clearances around the appliance for proper installation.

Cavity Preparation

Service Holes and Water Connection

Preparation for service holes, water hookup, and kosher requirements.

Hose and Cord Distance from Chassis

Installation Method A: Side Mounting

Attach Side Mounting Brackets

Step for securing mounting brackets to the unit for Method A.

Insert Unit into Cavity

Step for inserting the appliance into the cabinet space for Method A.

Installation Method A: Securing

Secure to Side Cabinets

Instructions for securing the unit to the side cabinets.

Secure to Top Cabinets

Instructions for securing the unit to the top cabinetry.

Installation Method B: Drawer Removal

Remove Lower Drawer

Step for removing the lower drawer as part of Method B.

Insert Unit into Cavity

Step for inserting the appliance into the cabinet space for Method B.

Installation Method B: Securing

Secure to Side Cabinets

Instructions for securing the unit to the side cabinets for Method B.

Secure to Top Cabinets

Instructions for securing the unit to the top cabinetry for Method B.

Refit Drawer onto Runners

Steps to re-install the drawer onto the runners for Method B.

Toekick Panel Installation

Plumbing and Drainage Options

Drainage Option 1: Standpipe

Details for the first drainage method using a standpipe.

Plumbing and Drainage Options

Drainage Option 2: Dual Air Gap;Break

Details for the second drainage method using a dual air gap/break.

Plumbing and Drainage Options

Drainage Option 3: Sink Trap;Waste Tee

Details for the third drainage method using a sink trap or waste tee.

Final Connections and Startup

Connect Water and Power

Steps to connect the water supply and switch on the appliance.

Troubleshooting Guide

Common issues encountered during installation and their potential solutions.

Final Installation Checklist

Cafe CDD420P2TS1 Specifications

General

Brand	Cafe
Model	CDD420P2TS1
Category	Dishwasher
Language	English