CalAmp | LMU-30xx/CVF-3030 & OBD-II Extender Cable Install Guide
Page 20 MBUD-0268v1.4
8 DIAGNOSTIC AND VEHICLE MAINTENANCE
Prior to performing vehicle maintenance, disconnect the OBD-II Extender Cable from the vehicle’s OBD-II
Port. Once the OBD-II Extender Cable is removed, access to the vehicle bus data is available.
When vehicle maintenance is complete, plug the OBD-II Extender Cable back into the vehicle’s OBD-II
port. To deter device tampering, remove any existing residue from the device, and then place a new
piece of tamper tape over the connection.
To Next Page
Loading...