POCKET REFERENCE GUIDE — 16
Using Memory Storage Keys (M1 - M3)
In addition to the standard cumulative
Memory (as previously described), your
calculator has three independent Storage
Registers – M1 through M3 – that can be
used to permanently store single, noncu-
mulative values. The following example
shows the use of M1 (S1). To use M2
or M3, replace the presses of the 1 key
with presses of the corresponding number
key (2 or 3).
Your can replace a value in one of these
Memory registers by storing a new value in
place of the stored value.
FUNCTION KEYSTROKES
Store single value in M1 S1
Clear M1 0S1
Recall M1 ®1
Example:
Store 175 into M1, recall the value, and
then clear the value.
KEYSTROKES DISPLAY
175S1 M-1 175.
Oo 0.
®1 M-1 175.
0S1 M-1 0.
STORED
STORED
STORED
To Next Page
Loading...
Need help?
General
