GETTING STARTED ...................................1
KEY DEFINITIONS ..................................1
Basic Function Keys..............................1
Unit Keys ...............................................2
Length, Width and Height Keys.............3
Construction Project Keys .....................3
Excavation/Volume Keys .......................4
Miscellaneous Functions .......................6
PREFERENCE SETTINGS .....................8
ENTERING DIMENSIONS ....................10
Linear Dimensions...............................10
Square and Cubic Dimensions............10
CONVERSIONS.....................................11
Linear Conversions..............................11
Square and Cubic Conversions...........11
Weight Conversions.............................12
Weight per Volume Conversions .........12
Converting D:M:S ................................12
BASIC MATH OPERATIONS.................13
Adding and Subtracting Strings
of Dimensions....................................13
Multiplying Dimensions........................13
Dividing Dimensions ............................14
PERCENTAGE CALCULATIONS ..........14
MEMORY OPERATION.........................15
Using M+ .............................................15
Using Memory Storage
Keys (M1 - M3)..................................16
PAPERLESS TAPE................................17
USING THE HEAVYCALC PRO ...............18
LENGTH, WIDTH, AND HEIGHT KEYS......18
Using Multi-Function W Key to find
Area, Square-Up and Perimeter........18
Using Multi-Function h Key to find
Volume, Wall Area and Room Area .......18
VOLUME CALCULATIONS ...................19
TABLE OF CONTENTS
To Next Page
Loading...
Need help?
General
