POCKET REFERENCE GUIDE — 40
Default Settings
After a Clear All (Çx), your calculator
will return to the following settings:
STORED VALUES DEFAULT VALUE
Load Size 8 CU YD
Percent Shrink 5%
Percent Swell 10%
Weight per Volume 1.5
Ton Per CU YD
If you replace your battery or perform a
Full Reset* (press O, hold down x, and
press o), your calculator will return to
the following settings (in addition to those
listed above):
PREFERENCE SETTINGS DEFAULT VALUE
Fractional Resolution 1/16
Area Display Standard
Volume Display Standard
Exponent Off
Meter Linear Display 0.000
Decimal Degree Display 0.00°
Fractional Mode Standard
*Depressing the Reset button located above the
l key will also perform a Full Reset.
Auto Shut-Off
Your calculator will shut itself off after
about 8-12 minutes of non-use.
To Next Page
Loading...
