[ ]
Square Root — Used to find the square
root of a number.
Note: Attempts to find
the square root of a linear or volume
dimension will cause an “Error”.
[Conv] [ ]
x
2
— Finds the square of the displayed
value.
Note: Attempts to find the square of
an area or volume dimension will cause an
“Error”
.
[M+]
Memory Add — Adds the displayed num-
ber to the value stored within the semi-
permanent Memory.
[Conv] [M+]
Memory Minus — Subtracts the dis-
played value from Memory.
[Rcl]
Recall — Recalls values stored in any
register. [Rcl] [M+] displays the value in
Memory.
[Rcl] [Rcl]
Memory Display/Clear — Displays the
value in Memory and clears the register.
[Conv] [Rcl]
Memory Clear — Clears the Memory
without changing the current display.
User’s Guide – 5
To Next Page
Loading...
