Need help?Do you have a question about the Calculated Industries CONVERSIONCALC PLUS and is the answer not in the manual?
General| Type | Scientific |
|---|---|
| Cover | Yes |
| Form factor | |
| Control type | Buttons |
| Product color | Silver |
| Digits | 14 digits |
| Display type | LCD |
| Display tilting | No |
| Display size (HxV) | 19 x 65 mm |
| Display number of lines | - lines |
| Display number of characters | 9999999.99 |
| Display size (HxV) (imperial) | 0.73 x 2.56 \ |
| Storage media type | - |
| Battery type | CR2016 |
| Power source | Battery |
| Battery voltage | 3 V |
| Number of batteries supported | 1 |
Weight and Dimensions| Depth | 17 mm |
|---|---|
| Width | 76 mm |
| Height | 145 mm |
| Weight | 118 g |
Explains fundamental calculator keys and their functions for basic operation.
Details the primary operational keys like On/Clear, Off, arithmetic, and number entry.
Covers auxiliary keys such as backspace, memory, square root, and preference settings.
Lists keys for converting linear, area, and volume measurements, including units like feet, meters, and liters.
Allows adjustment of fractional answer display formats, from 1/64 to 1/32 inch.
Configures the display format for area calculations, choosing between standard, sq feet, sq yd, or sq m.
Sets the display format for volume calculations, supporting standard, cu yd, cu feet, or cu m.
Enables or disables exponential notation display for large or small numbers.
Adjusts metric rounding precision and mathematical operation order (chain/standard).
Sets the calculator to display fractions in standard, constant, or standard format.
Explains the use of ten independent storage registers for saving single, noncumulative values.
Guides on utilizing secondary (blue) and tertiary (red) keys to access advanced functions and units.
Details how to input linear measurements, including feet, inches, and fractional values.
Explains the method for entering square and cubic dimensions by repeating unit keys.
Demonstrates converting linear measurements like feet and inches to other related units.
Shows how to convert area measurements, such as square meters, to different units like sq yd and sq ft.
Provides examples of converting volume units like liters, quarts, and gallons to other measures.
Lists the default values for stored data and preference settings after a reset.
Details the process and charges for repair services outside the warranty period in the US.
Guidance on obtaining warranty or non-warranty repair services from dealers outside the US.
To Next Page