Calculated Industries CONVERSIONCALC PLUS User Manual

Pocket RefeRence Guide — 43
Some states do not allow the exclusion
or limitation of implied warranties or
liability for incidental or consequential
damages, so the above limitation or
exclusion may not apply to you. This
warranty gives you specic rights, and
you may also have other rights, which
vary from state to state.
FCC CLASS B
This equipment has been certied
to comply with the limits for a Class
B calculating device, pursuant to
Subpart J of Part 15 of FCC rules.
LOOKING FOR NEW IDEAS
Calculated Industries, a leading
manufacturer of special-function
calculators and digital measuring
instruments, is always looking for
new product ideas in these areas.
If you have a new product idea,
please visit our “Bright Idea” page at
www.calculated.com/brightidea.asp.
For suggestions about improving this
product or other products, please
visit us at www.calculated.com under
“Contact Us.” Thank you.
PRG8030E-A.indd 42 8/21/2012 11:39:52 AM

Calculated Industries CONVERSIONCALC PLUS Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Silver
Digits	14 digits
Display type	LCD
Display tilting	No
Display size (HxV)	19 x 65 mm
Display number of lines	- lines
Display number of characters	9999999.99
Display size (HxV) (imperial)	0.73 x 2.56 \
Storage media type	-
Battery type	CR2016
Power source	Battery
Battery voltage	3 V
Number of batteries supported	1

Weight and Dimensions

Depth	17 mm
Width	76 mm
Height	145 mm
Weight	118 g