Calculated Industries CONVERSIONCALC PLUS User Manual

Pocket RefeRence Guide — 17
USING EXPONENTIAL
NOTATION
Your calculator is defaulted to
have exponential notation set to
“on.” Therefore, any integer value
exceeding seven digits will display
in exponential format. When
exponential notation is off, the
calculator adjusts dimensioned
values to a higher unit when the
display limit is exceeded (known as
Auto-Ranging); e.g., “20,000,000
mm” exceeds the seven-digit display,
so “20,000 m” is displayed. This
auto-ranging also applies to other
dimensional units, such as Inches to
Feet, Feet to Yards, etc.
To enter an exponential value, enter
the main value, press
S/, then
enter the exponential power.
Enter 2.34 x 10
8
into the calculator.
KEYSTROKE DI SPLAY
2.34 2.34
S/8 2.34
8
= 2.34000
08
You can also toggle a displayed value
to exponential notation by simply
pressing the
/ key.
(cont’d)
PRG8030E-A.indd 17 8/21/2012 11:39:51 AM

Calculated Industries CONVERSIONCALC PLUS Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Silver
Digits	14 digits
Display type	LCD
Display tilting	No
Display size (HxV)	19 x 65 mm
Display number of lines	- lines
Display number of characters	9999999.99
Display size (HxV) (imperial)	0.73 x 2.56 \
Storage media type	-
Battery type	CR2016
Power source	Battery
Battery voltage	3 V
Number of batteries supported	1

Weight and Dimensions

Depth	17 mm
Width	76 mm
Height	145 mm
Weight	118 g