Calculated Industries CONVERSIONCALC PLUS User Manual

Pocket RefeRence Guide — 37
AUTO SHUT-OFF
Your calculator will shut itself off after
about 8-12 minutes of non-use.
ACCURACY/ERRORS
Accuracy/Display Capacity
Your calculator has a twelve digit
display. This is made up of eight digits
(normal display) and four fractional
digits. You may enter or calculate
values up to 19,999,999.99. Each
calculation is carried out internally to
twelve digits.
Errors
When an incorrect entry is made, or
the answer is beyond the range of
the calculator, an error message will
display. To clear an error condition you
must press the
O button once.
At this point you must determine
what caused the error and re-key the
problem.
Error Codes
OFLO
Overow (too large)
MATH Error
Divide by 0
DIM Error
Dimension error
ENT Error
Invalid entry error
PRG8030E-A.indd 36 8/21/2012 11:39:52 AM

Calculated Industries CONVERSIONCALC PLUS Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Silver
Digits	14 digits
Display type	LCD
Display tilting	No
Display size (HxV)	19 x 65 mm
Display number of lines	- lines
Display number of characters	9999999.99
Display size (HxV) (imperial)	0.73 x 2.56 \
Storage media type	-
Battery type	CR2016
Power source	Battery
Battery voltage	3 V
Number of batteries supported	1

Weight and Dimensions

Depth	17 mm
Width	76 mm
Height	145 mm
Weight	118 g