Calculated Industries CONVERSIONCALC PLUS - Memory Storage Registers (M0-M9)

Pocket RefeRence Guide — 19
(cont’d)
When Memory is recalled (rP),
consecutive presses of
P will
display the calculated Average and
total Count of the accumulated values.
Using M+
KEYSTROKE DI SPLAY
45P M+ 45. &
25P M+ 25. &
15SP M- 15. &
rP TTL 55. &
P AVG 18.33333 &
P CNT 3. &
rr M+ 55.
Using Memory Storage Keys (M0 - M9)
In addition to the standard cumulative
Memory (as previously described),
your calculator has ten independent
Storage Registers – M0 through M9 –
that can be used to permanently store
single, noncumulative values.
The following example shows the use
of M0 (
Sr0). To use M1 through
M9, replace the presses of the 0
key with presses of the corresponding
number key (
1 through 9).
PRG8030E-A.indd 19 8/21/2012 11:39:51 AM