POCKET REFERENCE GUIDE — 9
Ç √
x
2
— Squares the value in
the display.
√
Square Root Key
— Used
to find the Square Root of a
non-dimensional or area
value.
Ç •
Total Cost
— Based on
entry of per unit cost.
Ç 0
Store Weight per Volume
— Stores a new
Weight per
Volume
value as listed
below:
Note: After entering a value
and pressing
Ç 0
, continue
pressing the
0
digit key until
you’ve reached the desired
Weight per Volume format. To
recall your setting, press
® 0
.
• Ton Per CU YD
• LB Per CU YD
• LB Per CU FEET
• MET Ton Per CU M
• kG Per CU M
This value is stored until
you change it or perform a
Clear All
(Ç x).
Ç 5
On-Center Spacing (o.c.)
— Stores a new on-center
spacing (e.g., 2 4 i
Ç 5). The value is used
for jack and rake wall stud
calculations. Default is 16”.
To Next Page
Loading...
