Calculated Industries Construction Master 5 - Weight, Arc;Circle, and Framing Keys

POCKET REFERENCE GUIDE — 4
w Weight Key — Enters or
converts (a volume value)
to Tons, Pounds, Metric
Tons or Kilograms .
Repeated presses will cycle
through these units.
Arc/Circle Keys
C Circle Key — Calculates
Circle Area and
Circumference based on
entered Diameter.
Ç C Arc — Calculates Arc
Length or Degree based on
entered Diameter and Arc
Degree or Length (e.g., if
Arc Degree is entered, it
will calculate Arc Length,
and vice versa).
Right Triangle/Roof Framing Keys
p Pitch Key — This key is
used to enter or calculate
the Pitch (Slope) of a roof
(or Right Triangle). Pitch is
the amount of “Rise” over
12 Inches of “Run.” Pitch
may be entered as: