Calculated Industries Construction Master 5 - Page 16

POCKET REFERENCE GUIDE — 12
(Cont’d)
PRESS : SETTING--FUNCTION
Fourth press
of % : Meter Linear Displays:
--0.000 M
+ --FLOAt M (floating point)
+ --0.000 M (repeats options)
Fifth press
of % : Decimal Degree Displays:
--0.00º
+ --FLOAt (floating point)
+ --0.00º (repeats options)
Sixth press
of % : Fractional Mode:
--Std.
+ --COnSt
+ --Std. (repeats options)