Calculated Industries Machinist Calc 4086 - Page 66

Us e r 's GU i d e — 65
5) Volume
Answer
Format
– Standard: if units entered are the same
– e.g., Feet x Feet x Feet – the answer will
remain in this format (Cubic Feet), but if units
entered are different – e.g., Feet x Feet x
Inches – volume answer will be displayed in
Cubic Feet.
– Cubic Feet: volume answers always
displayed in Cubic Feet, regardless of unit
entry – e.g., Inches x Inches x Inches = Cubic
Feet.
– Cubic Meters: volume answers always
displayed in Cubic Meters, regardless of
unit entry – e.g., Feet x Feet x Feet = Cubic
Meters.
– Cubic Inches: volume answers always
displayed in Cubic Inches, regardless of
unit entry – e.g., Feet x Feet x Feet = Cubic
Inches.
6) Fractional
Mode
– Standard: fractions are displayed to the
nearest fraction.
– Constant: fractions are displayed in the set
Fractional Resolution.
7) Mathematical
Operation
– Order: the calculator uses the Order of
Operations Method (10 + 4 x 5 = 30).
– Chain: the calculator uses the Chaining
Method (as entered: 10 + 4 x 5 = 70).