Calculated Industries Scale Master Classic - Scale Master Classic Memory Function Guide

Using the Memory Function
The memory function allows you to
add rolled or counted va l u e s . B u t
you cannot add dimensioned
( ro l l e d ) and undimensioned ( c o u n t-
ed) va l u e s .
To add rolled va l u e s :
1 ) Roll the fi rst va l u e * .P ress [ M 1 + ] .
The display resets to “ 0 ,” t h e
m e m o ry indicator (M) lights and
the value is added to memory.
2 ) Roll the next va l u e .P ress [ M 1 + ] .
This value is added to your pre-
vious value stored in memory.
3 ) You can continue to add va l u e s
using the [M1+] key. P re s s [ R c l ]
[ M 1 + ] to rev i e w the total in mem-
o ry.
* F or Count va l u e s ,you must press the
[ S u b t r a c t / C o u n t ] key to count yo u r
va l u e .P ress [ M 1 + ] to add this value to
m e m o ry.
The annunciator “M” will display
when a value is stored in memory.
1 9 – User’s Guide