Key Definitions/Functions
[ O ff/On] – Power On/Off switch
Tu rns power On or Off. Tu rn i n g
p o wer Off cl e a rs the display and all
values prev i o u s l y stored in memo-
ry. Tu rning the unit Off does not
clear scales or modes.
[Lock] – Lock switch
Locks the mode and scale so that they
cannot inadvertently be changed. It
is advised to operate in the locked
position unless you are specifically
setting or changing scales.
[Subtract/Count] – Subtract key
Used to perfo rm four functions:
1) when this key is held dow n
while you are ro l l i n g , the unit will
s u b t ract the rolled distance fro m
a n y prev i o u s ly rolled distances or
f r om zero ;2) when in Count mode,
used to increase the count value by
one (pressing [Reset] will clear the
c o u n t ) ; 3) when in the pro gra m-
ming mode for height or custom
s c a l e s ,used to decrement the fl a s h -
ing va l u e ; 4) when holding key
4 – Scale Master
®
C l a s s ic v 2 . 0
To Next Page
Loading...
Need help?
General
