Calculated Industries Time Master II User Manual

Beginning, End & Duration
The [Beg], [End] and [Dur] keys are used to
calculate starting and ending times as well
as duration of time. Given two values, the
third can be easily found. You may enter
a whole number, a point in time or a
period of time into the [Beg] and [End] reg-
isters. Only periods of time can be
entered into [Dur]. AM/PM entries for
duration cause an error.
Scheduling – Multiple Steps
A delivery truck travels 132 miles from
Los Angeles to Palm Springs. In his log,
the driver records the following entries:
Departure 1 9:22 AM
Stop 1 10:03 AM
Departure 2 11:17 AM
Stop 2 1:15 PM
Find the total time for this drive:
Steps Keystrokes
Clear calculator [On/C] [On/C]
Enter Departure 1 9 [:] 22 [AM] [Beg]
Enter Stop 1 10 [:] 03 [AM] [End]
Find duration [Dur]
ANSWER: DUR 0:41:00 HR MIN SEC
Enter into mem. [Stor] 0
Enter Departure 2 11 [:] 17 [AM] [Beg]
Enter Stop 2 1 [:] 15 [PM] [End]
Find duration [Dur]
24 – Time Master ™ II

Calculated Industries Time Master II Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	-
Digits	8 digits
Display type	LCD
Display tilting	No
Display size (HxV)	15 x 57 mm
Display number of lines	- lines
Display size (HxV) (imperial)	0.56 x 2.25 \
Battery type	CR2032
Power source	Battery
Battery voltage	3 V
Number of batteries supported	1

Weight and Dimensions

Depth	13 mm
Width	76 mm
Height	140 mm
Weight	90.8 g