Split/Lap Function
You can select whether the [S/Lap] key
acts like a split function or a lap func-
tion through the preference feature.
When the calculator is set to the SPLIT
function (default), when you press the
[S/Lap] key, the calculator will pause the
timer display and show the amount of
time elapsed from the start of the timer
to the time the key was pressed. The
second press returns to the counter, the
third press stops it again, etc.
When the calculator is set to the LAP
function, the first press of the [S/Lap]
key will show the amount of time
elapsed from the start of the timer, to
the press of the [S/Lap] key. Further
presses of the [S/Lap] key will return to
the counter or show the time between
presses.
User’s Guide – 27
To Next Page
Loading...
