Calculated Industries Time Master II - Storing Timer Values

Storing Time Values
Values obtained from the timer can be
stored or used in calculations.
Steps Keystrokes
Clear calculator [On/C] [On/C]
Start timer [Timer] [Timer]
Freeze timer display [S/Lap]
Enter value into memory [=] [Stor] [1]
Recall memory [On/C] [Rcl] [1]
Calculating with Time Values
1. Press [S/Lap] to freeze the
display.
2. Press the equals key [=].
3. Press the math key ([+] [–] [x] [#]).
4. Enter another value then press the
equals key [=].
5. You can convert timer values to deci-
mal time by pressing [Conv] then the
format you want to convert the timer
value to.
26 – Time Master ™ II