2. Access the Tape function:
[Rcl] [=] TTL = 22:00:00 HR MIN SEC
3. Scroll from first value to total using the
[+] key:
[+] 01 4:00:00 HR MIN SEC
[+] 02+ 5:00:00 HR MIN SEC
[+] 03+ 6:00:00 HR MIN SEC
[+] 04+ 7:00:00 HR MIN SEC
[+] TTL = 22:00:00 HR MIN SEC
4. Scroll back to the last 2 values using
the [–] key:
[–] 04+ 7:00:00 HR MIN SEC
[–] 03+ 6:00:00 HR MIN SEC
5. Exit the Paperless Tape and add to the
string:
[=] TTL = 22:00:00 HR MIN SEC
[+] 2 [Hr] [=] 24:00:00 HR MIN SEC
Note:
To exit the tape mode, you can press
a
ny key besides [Off], [+] or [–].
When you press a key to exit the tape, the
calculator will display the last value
entered into the tape. If the value was [=]
the display will show the total (TTL =). If
there were more than one [=] during the
string, the last [=] pressed will show as the
total, and all others will be designated as
subtotals (SUB =). The next press will
begin a new tape function.
User’s Guide – 29
To Next Page
Loading...
Need help?
General
Weight and Dimensions
