Calpeda I-MAT 5,2 TT-A User Manual

EN
Page 50 / 164 I-MAT_Ed6 - Operating Instructions
16.6. Parameter tC – Constant temperature setting
N° Description Parameter values Standard Modications
tC01 System type
HEAt
COOL
HEAt
COOL
tC02 Restart temperature (°C) 10
tC03 System dynamic 3
tC04 Temperature PID (proportional gain) 3000
tC05 Temperature PID (integral time constant) 400
tC06 Temperature PID (derivative time constant) 1000
tC07 Set-point time limit (s) 60
16.7. Parameter CF – Constant ow rate settings
N° Description Parameter values Standard Modications
CF01 Flow rate PID (proportional gain) 3000
CF02 Flow rate PID (integral time constant) 400
CF03 Flow rate PID (derivative time constant) 1000
CF04 Dry-run detection percentage (%) 95
CF05 Dry-run time limit (s) 60
16.8. Parameter MAn – Fixed speed pump settings
N° Description Parameter values Standard Modications
MAn1 Primary xed speed operating frequency (Hz) 45
MAn2 Secondary xed speed operating frequency (Hz) 45
MAn3 Remote control activation On, OFF Off
MAn4 Minimum value for remote control (Hz) 30
I-MAT_Ed6.indd 50I-MAT_Ed6.indd 50 18/11/20 08:2118/11/20 08:21

Calpeda I-MAT 5,2 TT-A Specifications

General

Brand	Calpeda
Model	I-MAT 5, 2 TT-A
Category	Media Converter
Language	English