10
Once the corner is removed, place aside with
great care of not bending or stepping on the
protruding clamps behind the corner.
Repeat the removal process with the corner
panel of the other end of the front of the spa.
Step 2
Once both corners are removed, place one hand
under the front panel and one hand on either
corner.
Once prepared, pull both the center and your cho-
sen corner at the same time to release the panel.
Caution: Brace for the weight of the panel once it is
removed. Failure to do so can result in injury such
as pinched ngers, cuts, or other injuries.
Step 3
Once the panel is removed, use the wooden
support boards to move your panel around if
needed.
Note: Do not move your spa panel using
the white clamp in mechanism.
Step 4
To Next Page
Loading...
