Calspas SWIM - Page 11

11
Once the front panel has been removed, your
electrician or contractor may perform the nec-
essary electrical work to power the spa.
Once the required work is completed, retrieve
the panel and align the cabinet mounted
plastic clamp with the bottom spa mounted
plastic retainer.
Note: In order for the panel to align, the
plastic clips must be leveled with each oth-
er. If the panel is misaligned, remove and
reinstall the panel.
Step 5
Once the panel is aligned, apply medium pressure
to the bottom center of the panel to secure it into
place. Similarly apply pressure to the top center of
the panel as well. You may also use the bottom of
your st to tap the panel back into place.
Note: The panels are secured once you hear and
feel a thump securing the plastic clamp together
with the base.
Step 6
Upon securing the front panel, proceed with
installing the corners.
Similarly to how the corners were removed,
align the corner with the lip of the spa, and
press down.
Step 7
-Thump-
-Thump-