Camco Vortex Series - Page 4

EXPLANATION OF SYMBOLS / SAFETY
CAUTION – RISK OF ELECTRIC SHOCK – DO NOT OPEN
WARNING – TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
AMPLIFIER TO RAIN OR MOISTURE
CAUTION – HIGH VOLTAGE HAZARDS
EXIST WITHIN THIS PRODUCT.
REFER ALL SERVICING TO
AUTHORISED PERSONNEL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROW HEAD SYMBOL ALERTS
THE USER TO DANGEROUSLY HIGH VOLTAGE AT THE SPEAKON
CONNECTORS THAT COULD POTENTIALLY BE LIFE THREATENING.
THE LIGHTNING FLASH WITH ARROW HEAD SYMBOL, IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS
VOLTAGE WITHIN THE PRODUCT’S ENCLOSURE
THE EXCLAMATION MARK IS INTENDED TO ALERT THE USER
TO IMPORTANT INSTRUCTIONS ALSO FOR MAINTENANCE IN THE
LITERATURE ACCOMPANYING THE AMPLIFIER
THE AMPLIFIER MAY ONLY BE CONNECTED
TO A SOCKET WITH A CONNECTION TO GROUND.
USER MANUAL
VORTEX 3 QUADRO
P.2
USER MANUAL
VORTEX 3 QUADRO
P.3
1. Read the information for use (user manual)
When shipping the VORTEX amplier, always use the original shipping carton
and packing materials. For maximum protection, repack the unit as it was origi-
nally packed at the factory.
2. Environments
Use this amplier only in E1, E2, E3 or E4 environments according to EN55103-2
– Electromagnetic compatibility – Product-family norm for audio, video and
audio-visual installations as well as for studio-and lighting-control inastallations
for professional applications – Part 2: Immunity.
3. Ventilation
Slots and openings in the cabinet are provided for ventilation, to ensure reliable
operation of the amplier and to protect it from overheating. These openings
must not be blocked or covered. This amplier should not be installed unless
proper ventilation is provided or manufacturer’s instructions have been
adhered to.
4. Water And Moisture
Do not use this amplier near water (for example, in damp rooms or near a
swimming pool).
5. Cleaning
Unplug this amplier from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners.
6. Power-cord Protection
Power-supply cords should be routed so that they are not likely to be walked on
or pinched by items placed upon them or against them, paying particular atten-
tion to cords and plugs, and the point where they exit from the amplier.