EasyManua.ls Logo

CAME G5000 - Power Supply and Signaling; Power Output; Signaling Device Outputs

CAME G5000
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A B GND A B S1 GND
10 11
- +
CAME
10 11 E1 E6 Rx Tx 1 2 3 3P 4 5 7 CX CY
p. 17 - Manual FA00571-EN v. 1 - 08/2017- © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice.
POWER SUPPLY
230 V AC - 50/60 Hz
Output to power 24 V AC accessories (normally) - max. 40 W.
If the power is out, you can power up the 24 V DC accessories by
using buffer batteries.
Output to notify the state of the barrier (Contact rated for: 24 V AC - 3 W max.).
It flags the state of the barrier, see function F10.
Output for connecting the luminous cord (Contact rated for: 24 V AC - 32 W
max.).
It flags the state of the barrier, with intermittent lights, see function F15.
Additional light connection output (Contact rated for: 24 V AC - 25 W max):
- flashing light, that flashes when the barrier is opening and closing.
- cycle or courtesy light, which is a freely positionable outdoor light for
enhanced lighting in the driveway.
Cycle, stays on from the moment in which the barrier starts opening until it
closes completely (including the automatic closing time).
Courtesy, stays on a settable time of between 60 and 1180 seconds, see
function F18.
SIGNALING DEVICES
EMC01
FILTER

Related product manuals