1.5 09/2010
© CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
3) Replace the Master pass on the transponder (TSP1) to enter the F-2 function.
4) The transponder (TSP2) led will start flashing red.
10.7 Creating a new card using the Master.
2) Place the Master pass on the transponder (TSP2). The display will scroll the functions; continue scrolling up to function F2.
IMPORTANT: before doing any programming, carefully read the instructions.
Follow the order of the following instructions otherwise the programming will not work
Master
1) Place the Master pass on the transponder (TSP1). The display will show “F-1”
Green Led
Green Led
Master
Master
Green Led
Intermittent Red LED
To Next Page
Loading...
