CAME XVP F Configuration Manual

System
Date and Time
Network
SIP
Credentials
Access control
Device
Images and logos
Maintenance
Diagnostics
Date and Time
TIME SETTINGS
SERVER NAME
TIME ZONE
Automatic
Date and Time
Help
Exit
Save
Reload
DATE
TIME
02 January 1970
Europe/Rome
TIME SETTINGS
DATE
TIME ZONE
Manual
Date and Time
Help
Exit
Save Reload
02 January 1970
Europe/Rome
TIME
SERVER NAME
System
Date and Time
Network
SIP
Credentials
Access control
Device
Images and logos
Maintenance
Diagnostics
Date and Time
❶
❷
❸
❹
❺
Page 13 - Manual FA 014 82- E N - 10/2020 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
❶Choose between manual and auto mode.
In automatic mode, it allows to choose to synchronise to the XIP system
master or to an external service (NTP).
By selecting NTP, the network to which the device is connected must be able
to access the internet.
❷ Address of the server the device uses to synchronise the date and time.
The server can be the system master
or an external server.
❸ Set the date and time manually.
❹ Select the continent and state/city where the system is installed from the
dropdown lists. This ensures the time zone and daylight saving time are set
correctly.
❺Save the configuration.

CAME XVP F Specifications

General

Brand	CAME
Model	XVP F
Category	Intercom System
Language	English