USER
LOGIN MODE
SETTINGS
Language
Enter
PASSWORD
INSTALLER
System
Date and Time
Network
SIP
Credentials
Access control
Device
Images and logos
Maintenance
Diagnostics
MODEL
HW VERSION
SW VERSION
ACCOUNT STATUS
Registered
System
Help Exit
❶
❷
Page 12 - Manual FA 014 82- E N - 10/2020 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Entering programming mode
Some of these sections require specific knowledge of how to operate the video-entry system. Incorrect configuration may cause full or partial malfunctions.
For this reason, some parameters can only be modified from the installer profile (default password 112233).
To access the configuration web page, type the address of the device to be configured into the browser address bar (Chrome, Firefox, Safari).
❶Select USER to access a limited part of the system settings.
Enter the user password (default password: 123456).
This type of access allows you to update the firmware and consult the following
pages.
❷ Select INSTALLER to access all system settings.
Enter the installer password (default password: 112233).
There is no scroll bar on the right on the configuration web pages.
To scroll through the web pages, press and hold down the left mouse button and drag.
On a smartphone or tablet, swipe your finger down the screen.
System settings
This shows the device characteristics, hardware and software versions, and the SIP
account status.
The XVP entry panel can be configured as the MASTER from the PCS/XIP for
‘Serverless’ systems.
Only one device can be configured as the MASTER.
Tap HELP to go to the configuration manual in PDF format.
To Next Page
Loading...
Need help?
General
