CAME ZLB24SA - Page 40

Page 40 - Manual FA01894-EN - 09/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
BUS fl ashing beacon <Automatic closing time colour>
Set the BUS fl ashing beacon colour during the automatic closing time.
The function only appears if there is a BUS fl ashing beacon connected.
Confi guration>
BUS Devices>
BUS fl ashing beacon
Auto. cl. colour O
White
Yellow
Orange
Red
Purple
Blue
Light blue
Green (Default)
<Pre-fl ashing colour> BUS fl ashing beacon
Set the fl ash colour for before opening and closing manoeuvres (pre-fl ash).
The function only appears if there is a BUS fl ashing beacon connected.
Confi guration>
BUS Devices>
BUS fl ashing beacon
Pre-fl ashing colour White (Default)
Yellow
Orange
Red
Purple
Blue
Light blue
Green
<Signal error> BUS fl ashing beacon
Set the colour of the BUS fl ashing beacon in the event of an error signal.
The warning light is activated after sending a command for movement.
The function only appears if there is a BUS fl ashing beacon connected.
Confi guration>
BUS Devices>
BUS fl ashing beacon
Signal error Deactivated (Default)
White
Yellow
Orange
Red
Purple
Blue
Light blue
Green