Canatal M52 - Sensor Calibration

M52 Microprocessor User's Guide
M52UMCT Oct-03 37
Sensor Calibration
The sensor calibration page under the {Testmode} tab is as follows:
Set 0°C Change page Supply voltage percentage
Temperature input readings Load default valueHumidity input readings
Under the sensor calibration page, you can:
- Review the current temperature inputs, adjust the 0°C reference and restore
temperature input offsets to default value.
- Review the current humidity inputs and restore humidity input offsets to default value.
- Review the supply voltage percentage.
Card icon
State selector