SURVEY METER Sensors, electronics, controls,
indicators, batteries.
Survey Meter Functions: Sense and display Dose, Dose rate,
provide necessary indications.
DISPLAY LCD panel with switchable back light.
Display Functions: Show dose rate, accumulated dose, low
batteries condition, alarm set points, test and
fault indicators.
CONTROL PANEL Membrane switch panel.
Control Panel Functions: Provide operator's input for normal use and for
test of the instrument.
SOFTWARE/EPROM VERSION
The processor's program which controls the functions and modes of the ADM300
survey meter is controlled by two socketed EPROM IC(s) in the meter.
EPROM VERSION VERIFICATION
The EPROM version (date) can be verified using the ADM300 keypad during power
up. With the survey meter OFF, press and hold the SET and AUDIO button while
pressing the POWER ON/OFF button. The display will indicate "date: mm/dd/yy"
with ERPOM version's month/day/year shown in the mm/dd/yy field. Releasing the
buttons returns the ADM300 normal operation.
2
To Next Page
Loading...
