C&T PC400 Series User Manual

PC400 / PC410 l User’s Manual
■ Serial Port 2 Configuration
 Serial Port
This item allows you to enable or disable serial port.
 Change Settings
This item allows you to change the address & IRQ settings of the specified serial port.
 Device Type Select
Change the Serial interface. Select <RS232>, <RS422> or <RS485> interface.
■ Serial Port 3 Configuration
 Serial Port
This item allows you to enable or disable serial port.
 Change Settings
This item allows you to change the address & IRQ settings of the specified serial port.
 Device Type Select
Change the Serial interface. Select <RS232>, <RS422> or <RS485> interface.
53
Chapter 4: BIOS Setup

C&T PC400 Series Specifications

General

Brand	C&T
Model	PC400 Series
Category	Control Unit
Language	English