Canon DC40 - Still Image Options; Erasing Still Images

92
Still Image Options
Erasing Still Images
You can erase still images recorded on the memory card or on the disc (DVD-RW only),
one at a time or all at once.
Be careful when erasing images. Erased images cannot be recovered.
Protected images on the memory card and images on a protected disc cannot be
erased.
Erasing a Single Image
Still images recorded on the disc: This option is only available with DVD-RW discs
recorded in VR mode.
1. Set the camcorder to view still images ( ).
2. Press the FUNC. button.
3. Select ( ) the [ IMAGE ERASE] symbol and press ( ).
4. Select ( ) [ERASE] and press ( ) to erase the still image.
5. Press the FUNC. button to close the menu.
Erasing a Single Image After Recording
You can erase the still image you recorded last while you are reviewing it within the time
selected for the [REVIEW] setting (or immediately after recording it, if set to [OFF]). Still
images on the disc: This option is only available with DVD-RW discs (VIDEO or VR
mode).
1. While reviewing the image after recording it ( ) press the
FUNC. button.
2. Select ( ) the [ IMAGE ERASE] symbol and press ( ).
3. Select ( ) the [ERASE] option and press ( ) to erase the still
image.
4. Press the FUNC. button to close the menu.
(60)
IMAGE ERASE
(60)
IMAGE ERASE