3-33
Working with Images in the Plug-In Module
Setting the IPTC Information
● The buttons listed below are displayed in each of the tab sheets. They
function in the same way in each sheet.
20 Reads IPTC information settings saved on your computer.
21 Saves the current IPTC information settings on your computer.
Select the IPTC information destination folder and then save the IPTC information.
22 Clears the IPTC information. This button also clears the information in the tab sheets not
currently shown.
23 Displays the image thumbnails.
24 When multiple images are selected, this button displays the IPTC information for the
previous image.
25 When multiple images are selected, this button displays the IPTC information for the
next image.
26 Shows the sequential position of the displayed image and the total number of frames.
27 Copies the IPTC information values entered before the [<Previous] or [Next>] button
was clicked.
28 Applies the specified IPTC information to the image.
29 Applies the specified IPTC information to the image, closes the [IPTC Information] dialog
box and ends the procedure.
Windows/Macintosh compatibility for IPTC settings data
IPTC settings saved on your computer are compatible with RAW Image Converter, the
Windows TWAIN Driver, and the Macintosh Plug-In Module.
To Next Page
Loading...
