Canon EOS-1D - Sets the Number of Shots to be Bracketed

5-13
Specifying Camera Settings from Your Computer
Personal Function Settings
P.Fn-07
P.Fn-08
P.Fn-09
Repeats bracketing during continuous shooting.
● While you hold down the shutter button, bracketing repeats continuously in the currently
selected drive mode.
● This function is useful when you want to continuously repeat the bracketing sequence.
Sets the number of shots to be bracketed.
● Select the number of shots from the list box.
● The usual 3-frame bracketing is changed to 2-, 3-, 5-, or 7-frame bracketing.
● In bracketing shots, if you select 5-frame bracketing with 1-stop increment, the bracketing
for the shots is –2, –1, 0, +1 and +2.
● If you select 5-frame white balance bracketing, the frames are shot at –10, –5, 0, +5 and
+10 mireds.
● This function is useful for adjusting the range of bracketing.
● Even when the setting is outside the bracketing level display range, the exposure is
compensated as specified.
● This function can be used in combination with C.Fn-9-2/3 and P.Fn-09.
Changes the bracketing sequence for C.Fn-9-2/3 to increased
exposure, standard exposure, and decreased exposure.
● The bracketing sequence when C.Fn-9-2/3 is selected (decreased exposure ➞ standard
exposure ➞ increased exposure) changes to increased exposure ➞ standard exposure
➞ decreased exposure.
● This function is useful when you want to start the bracketing sequence with a increased
exposed frame.
This function can be used in combination with P.Fn-08.