22
With AC Adapter Kit ACK-E2 (optional), you can connect the camera to
a household power outlet and not worry about the battery level.
1
Connect the DC Coupler.
¡ Connect the DC Coupler’s plug to the
AC adapter’s socket.
2
Connect the power cord.
¡ Connect the power cord to the AC
adapter.
¡ Insert the plug into a power outlet.
¡ When you are finished, disconnect
the plug from the power outlet.
3
Place the cord in the groove.
¡ Carefully insert the cord into the
groove without damaging it.
4
Insert the DC Coupler.
¡ Open the battery compartment cover
and open the DC Coupler cord notch
cover.
¡ Insert the DC Coupler until the lock
position and put the cord through the
notch.
¡ Close the cover.
Using a Household Power Outlet
Do not connect or disconnect the power cord while the camera’s <4>
switch is set to <1> or <J>.
To Next Page
Loading...
