¡ If the maximum aperture blinks, it indicates
underexposure. Turn the <6> dial to set a slower
shutter speed until the aperture value stops blinking.
¡ If the minimum aperture blinks, it indicates
overexposure. Turn the <6> dial to set a faster shutter
speed until the aperture value stops blinking or lower
the ISO speed.
Shutter Speed Display
The shutter speeds from “8000” to “4” indicate the denominator of the
fractional shutter speed. For example, “125” indicates 1/125 sec. Also, “0"6”
indicates 0.6 sec. and “15"” is 15 sec.
To Next Page
Loading...
