Canon EOS 800D - Attaching and Detaching a Lens

49
The camera is compatible with all Canon EF and EF-S lenses. Note
that you cannot use the EF-M lenses.
1
Remove the caps.
 Remove the rear lens cap and the
body cap by turning them as shown
by the arrows.
2
Attach the lens.
 Align the lens’s red or white index
with the camera’s index matching the
same color. Turn the lens as shown
by the arrow until it clicks in place.
3
Set the lens’s focus mode switch
to <AF>.
 <AF> stands for autofocus.
 <MF> stands for manual focus.
4
Remove the front lens cap.
Attaching and Detaching a Lens
Attaching a Lens
White index
Red index
Tips for Avoiding Smudges and Dust
 When changing lenses, do it quickly in a place with minimal dust.
 When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
 Remove dust on the body cap before attaching it.